View Cart (0 items)

Tuesday's Ask the Experts: Stripping vinyl floors

March 16, 2010
/ Print / Reprints /
| Share More
/ Text Size+
Tuesday''s Ask the Experts question from a cleaning professional on the International Custodial Advisors Network (ICAN) "Ask the Experts" page: Is it okay to strip and recoat vinyl floors at 60 degrees or lower?
The answer:
Stripping at or around 60 degrees poses no problem, but whether you can successfully apply finish at that temperature, depends on what the coatings industry calls the Minimum Film Formation Temperature (MFFT) or Minimum Filming Temperature (MFT) for the finish you are using. This will vary from product to product and there should be some information on the label as to the temperature below which the product will not form a durable film and adhere properly. A concrete slab can be 10 to 15 degrees colder than the inside air, especially in the North, and that means finishes stored in cold rooms (or trucks) may be below the MFFT before they are applied.
To be safe, check the manufacturer for the MFFT, store products well above that temperature, and apply only to floors above that temperature. While the product ... — Lynn E. Krafft, ATEX/ICAN Associate Editor
lekrafft@juno.com
To read the rest of this response, click here.
You must login or register in order to post a comment.