Cleaning & Maintenance Management Online

Tuesday's Ask the Experts: Marble floor care

October 12, 2010
Tuesday''s Ask the Experts question from a cleaning professional on the International Custodial Advisors Network (ICAN) "Ask the Experts" page: An employee spilled acid bowl cleaner on a marble floor. The marble does not have a smooth hi-gloss factory finish. It is a more natural finish with veins and natural pitting. Any ideas on how to remove the stain, or at least lighten it, without having to grind the stone?
The answer:
The hydrochloric acid in the bowl cleaner etched the marble by reacting with the calcium carbonate in the stone. I would suggest cleaning the area with an alkaline detergent solution to completely neutralize the acid (although it probably is spent by now), rinse well and dry the area. Once it''s dry, try gently sanding a small test area of the damaged spot with very fine sandpaper (800 grit) to see if the damage is less noticeable, if this works ... — Lynn E. Krafft, ICAN/ATEX Editor
To read the rest of this response, click here.