Floor Care Answers Lead to New Questions
FORT WORTH, TX — About a year ago, Powr-Flite, a leading manufacturer of floor care equipment, began a monthly news advisory called the "Powr-Flite Floor Care Troubleshooter."
According to Debby Davis, product manager for Powr-Flite, ever since the program began the company has received a number of questions from cleaning professionals, asking for help in addressing their specific floor care challenges.
Because of this, "We decided to answer some of the most frequent questions we receive, assuming others have the same challenges," she says.
One of the most common questions Powr-Flite receives is "How can I tell if floor finish is really dry?"
Most floor finish manufacturers suggest drying times of 20-25 minutes, but this can vary due to many factors like temperature, humidity and thickness of coating applied.
Davis recommends using either of the following tests, in an inconspicuous location, to see if a floor is really dry:
• Apply masking or "invisible" tape to the finish and pull it up with a quick jerk. If finish comes off with the tape you do not have good adhesion and the floor needs more drying time.
• Place facial tissue on the floor, step down on it, and twist the tissue over the floor. If the tissue does not tear, the floor is probably dry.
With changing seasons, Powr-Flite also fields frequent questions like: "What is the minimum temperature at which floor finish can be applied?"
"Finish is best applied at a room temperature of about 70 degrees (F)," says Davis. "Usually, the minimum room temperature to apply floor finish is 55 degrees (F). Colder temperature can negatively impact adhesion of the finish, which can cause the finish to crack, powder, or become brittle."
Lastly, another common question received is: "Why do floors lose their shine?"
"This can happen for many reasons, from soil load to the way light reflects on the floor," says Davis. "But the most common cause is lack of floor maintenance."
• Keep soil and grit off the floor by vacuuming or sweeping daily
• Install high quality floor mats at building entrances to prevent contaminants from entering the building as much possible
• Regularly auto scrub floors followed by buffing (burnishing); this brings a floor's shine back to life."
Established more than 45 years ago, Powr-Flite manufactures a full line of floor-care equipment and carpet extractors for the professional cleaning industry. Based in Fort Worth, TX, the company has over 20 patented designs and its products are recognized throughout the world for their innovation, durability, quality and performance. Their products are marketed directly to end-use customers as well as through distributors throughout the North America, Europe and the Far East.
Powr-Flite is on Facebook. Visit us at: http://www.facebook.com/PowrFlite