There are lots of opportunities to develop repetitive motion injuries (RMIs) in the cleaning industry.
As the name implies, RMIs are injuries to the body caused by repeatedly performing a physical task.
Common RMIs include carpal tunnel syndrome, tendonitis and bursitis, and these RMIs often put productivity at risk.
According to the Bureau of Labor Statistics, RMIs lead to an average of 18 lost work days per injury.
Also, once a worker suffers an RMI the likelihood that they'll be reinjured is high.
A Common Cause
One of the most common causes of RMIs in our industry is mopping.
It’s easy to understand why traditional wet mopping methods would cause RMIs.
The most common sizes of wet mops weigh between 16 and 24 ounces; these mops can triple in weight when wet.
That wet mop is attached to a 5-foot-long mop handle and is then swung around by a person who is often reaching away from their body and arching his or her back.
The employee is also expected to bend over to wring out the mop periodically and empty gallons of soiled cleaning solution from the mop bucket.
Then he or she is asked to repeat this task for hours on end, day after day.
Even so, there are surefire ways to limit the occurrence of RMIs caused by mopping.
It’s absolutely necessary to match the mop to the job and match the mop to the person.
Let’s look at matching the mop to the job first.
There are essentially two types of wet mopping common to our industry: Regular maintenance and cleaning up spills.
Regular maintenance is more likely to cause injury because it usually involves mopping a large area, and it’s often done daily.
If this task is being performed with a looped-end or cut-end wet mop, a regular mop handle and a bucket and wringer as described previously, it’s no wonder it would cause injury.
No matter how ergonomic the mop handle or bucket is, no matter how careful the worker is about keeping his or her back straight, elbows in, grip wide and using the lower body to swing the mop around, it’s still a strenuous activity when performed day after day.
Injury can be prevented by changing the way we maintain floors, and that brings us to microfiber flat mops.
People are rarely injured while dust mopping; injuries almost always come from wet mopping because of the physics of swinging a mop handle attached to a 5-pound wet mop.
Dust mopping is a completely different motion.
Cleaners are not swinging around a heavy mop, and they’re not extending the mop out away from their body as people tend to do when wet mopping.
When dust mopping, the weight of the mop is resting on the floor and the handle is nearly vertical, close to the body.
This is a much more ergonomic method and posture.
Microfiber flat mops are used in exactly the same way, and they are much lighter than conventional mops.
A 24-inch microfiber mop frame and handle with a damp mop pad attached weighs just over 2 pounds.
That’s a great size for an average size person (more on that later).
A user also doesn’t need to fill, drag around and empty a mop bucket with gallons of cleaning solution in it.
With microfiber mops, users can charge the mops ahead of time and replace them rather than wringing them out.
Here’s a brief explanation of how to mop with microfiber flat mops:
Cleaning Up Spills
When cleaning up spills, it’s still best to use a traditional style wet mop because they have a far greater capacity to absorb liquid and soil than microfiber flat mops.
In most environments, the time spent cleaning up spills will be a fraction of the time spent maintaining floors.
Because of this, workers can safely use traditional mops without having the kind of exposure to injury they would have using them for both types of mopping.
There are certainly best practices that need to be employed when using traditional wet mops.
Among them are:
Matching The Mop To The Person
Making sure a worker uses the right mop for his or her body is as important as choosing the right mop for the job.
A person who is small in stature should not be asked to use the same equipment as a person that’s large in stature.
A small statured person using a large wet mop is going to be more prone to injury than a larger person using the same mop; however a large person using a small wet mop isn’t being efficient.
If he or she is not being efficient then he or she is wasting motion, is taking longer to complete a task and is ultimately more likely to be exposed to injury from repetitive motion.
The key is to find the balance between efficiency and ergonomics.
Traditional wet mops and microfiber flat mops are available in various sizes.
A person who is small in stature should be using 12- to 16-ounce (small, medium) wet mops and 18-inch microfiber flat mops.
Average sized people should be using 16- to 24-ounce (medium, large) wet mops and 24-inch microfiber flat mops.
Large people can handle 24-ounce wet mops and 24- to 36-inch microfiber flat mops.
With microfiber flat mops, the longer they are the harder they are to push across the floor; 36-inch and larger flat mops should only be used for mopping large open areas like gymnasiums.
They should be used like a push broom instead of the figure eight motion described above; this will take pressure off of the user’s wrists and back.
Following these tips and guidelines will greatly reduce the risk of RMIs for workers.
Brett Haney is president of Microfiber Wholesale, a distributor of microfiber cleaning products. Brett is the third generation of Haneys involved in the development and distribution of cleaning products. MicofiberWholesale.com focuses on providing high-quality products for cleaning professionals and information on how to use them. Haney can be reached at Brett@MicrofiberWholesale.com.