View Cart (0 items)
Equipment / Extractors / Ask The Experts / Carpet Care
Ask The Experts

ICAN/ATEX: How do you keep a truckmount from freezing?

August 13, 2013
/ Print / Reprints /
| Share More
/ Text Size+

Many cleaning professionals visit the International Custodial Advisers Network (ICAN) Ask the Experts page for insight and, every business day, we deliver advice to better help you perform your job.

Tuesday’s Question:ICANATEX Logo

What do you use to eliminate freezing in a truckmount carpet van?

Tuesday’s Answer:

Here are some suggestions for frigid daytime on-the-job protection:
  • Leave your van running with the heater on high, initially at each job.
  • Transport the solution hose inside the facility or home to keep it warm until you are ready to start cleaning. If needed, run the solution hose inside of a spare vacuum hose to protect from freezing. Never leave wands and sprayers outside as they can freeze in just a few minutes.
  • Get your fresh water supply hooked up and the water moving. Make sure you have sink adapters as most outside faucets will be frozen or under snow.
  • You can install thick black foam insulation made for water pipes over the feed line or at least in the places where it would touch frozen surfaces.
  • Immediately run hot or warm water through the hoses and try to keep the flow going. Better yet, install a water supply tank in your van. Once you are set up, start your truck-mount, close all doors possible, and shut off the van engine.
  • Preplan the entire job so solution is always running thru the water supply and solution hoses.
  • When finished, reverse the process  ... Gary Clipperton, president of National Pro Clean Corp.

To read this response in its entirety, click here.

You must login or register in order to post a comment.