View Cart (0 items)
Ask The Experts / Hard Floor Care
Ask The Experts

ICAN/ATEX: How many coats of finish does VCT need?

June 28, 2013
/ Print / Reprints /
| Share More
/ Text Size+

Many cleaning professionals visit the International Custodial Advisers Network (ICAN) Ask the Experts page for insight and, every business day, we deliver advice to better help you perform your job.

Friday’s Question:ICANATEX Logo

In a daycare setting, is it safe to apply 5 coats of finish or will it create a safety hazard for the kids and the staff?

This school used a contractor who only applied one coat of finish when the VCT tile was laid.

They have been open now for 3 months and after nightly mopping and daily traffic the floors are dulling out and looking scratchy.

Is it too late to offer monthly spray buffing on the floors?

I offered this to the owners in my initial bid, but at the time they could not afford it.

Now, they may consider it.

Friday’s Answer:

Most VCT warranties recommend 2-3 coats of a commercial floor finish to protect new tile from abrasion and stains.

One coat will not provide enough of a base to respond to buffing.

By now, it is unlikely that any of the first coat is still remaining.

Spray buffing will only produce a slight sheen, which will not hold up.

What you need to recommend is a deep scrub and application of 3-4 coats of finish. Four coats will provide superior traction (non-slip surface) compared to just one coat.

The only exception might be on the kitchen floor when it is wet. Some kitchens place rubber mats in front of the dishwasher.

It is difficult to get more than … - Gary Clipperton, president of National Pro Clean Corporation

To read this response in its entirety, click here.

You must login or register in order to post a comment.