View Cart (0 items)
Vacuums / Mops And Buckets / Dust Mopping / Wet/Damp Mopping / Microfiber / Floor Finish / Matting / Autoscrubbers / Autoscrubbing / Rotary Floor Machines / Slip Meters / Ask The Experts / Hard Floor Care
Ask The Experts

ICAN/ATEX: How can I obtain and maintain a "wet look" on VCT?

November 28, 2012
/ Print / Reprints /
| Share More
/ Text Size+

Many cleaning professionals visit the International Custodial Advisers Network (ICAN) Ask the Experts page for insight and, every business day, we deliver advice to better help you perform your job.

Wednesday’s Question:ICANATEX Logo

What is the exact procedure for obtaining the “wet look” on vinyl composition tile (VCT)?

A client wants six coats of high-solids finish and the floor burnished. At what point do I burnish and how?

Wednesday’s Answer:

Maintaining a “wet look” is a combination of using a premium high-solids floor finish, applying thin coats, and then using a high-speed burnisher to maintain the shine.

wet look vctYour local JanSan supplier should be able to help you with the correct selection of a high-speed buffable floor finish.

Some finishes only allow an application of four coats within a 24-hour period.

If more than that is applied, the finish will dry, but not cure. One rule to follow when applying floor finish is to use a 100 percent plus one coat rule. For example, if you used   … - Lynn E. Krafft, ICAN/ATEX editor.

To read this response in its entirety, click here.

You must login or register in order to post a comment.